San Diego side · Mobile motorcycle locksmith · We come to your bike · Open every day, 8am to 9pm · Switch to Ventura County and Santa Barbara · Español
(619) 775-1858

Lost Givi, SHAD or Kappa Top Case Key: Your Real Options

  • Motorcycles and scooters only
  • We come to your bike
  • Keys cut and programmed on site
  • Proof of ownership required
Quick answerNeither Givi nor SHAD will cut you a key once every key is lost. Givi's own FAQ says a duplicate is not possible even if you have the code stamped on the lock, and SHAD says it does not copy keys or keep master keys, so both point you to a replacement lock set. If you still have one key, copy it now; if the case is locked and the keys are gone, a locksmith can often open it cleanly and either make a key or fit the new lock.

What Givi says about lost keys

Givi answers this directly in the FAQ on its Italian site. If you still have one key, you can buy a blank and have it cut at a hardware store or a specialist shop. If all the keys are lost, Givi says a duplicate is not possible, even when you have the code stamped on the lock barrel, and that the only alternative is to replace the whole lock, checking the correct lock model for your top case or side case.

That surprises riders, because Givi keys and barrels do carry a short code and it is natural to assume the factory can cut to it. The dealer route follows the same line: a Givi service point removes the old lock and fits a new one with new keys.

What SHAD says

SHAD's FAQ is just as blunt. Asked whether it is possible to make key copies of a SHAD case, the company says it does not make copies of keys and does not have master keys, and that after an incident with your keys the only recommendation it can offer is to change the cylinder with its corresponding keys.

SHAD also answers a question many riders ask next: can the case be keyed to the motorcycle? Its answer is no. SHAD says it is not possible to unify the cylinder of its cases with the motorcycle's starter cylinder because the codings are completely different, so the only unification on offer is between SHAD top cases and side cases.

And Kappa?

Kappa is Givi's sister brand, and its cases use the same kind of small keyed barrel in the latch. For a lost Kappa key, contact a Kappa dealer with the exact case model and any number on the key or lock, and expect the answer to be a replacement lock, as it is with Givi. Do not assume a Givi lock set fits a Kappa case, or the reverse, without checking the part against the case.

Rather have us handle it?

Call or text with your year, make, model and location.

Replacement lock sets and one key for several cases

Because the makers steer you to a new lock, it helps to know how the sets are sold. Lock parts differ between case families, so check the fit for your exact case with a dealer before ordering.

BrandHow replacement locks are sold
Givi standard locksLock sets with keys, sold for a single case or as a matched three-case set so one key works them all
Givi Security LockA different lock style used on some Givi cases, sold for one case or as matched sets for several. Ask a Givi dealer which style your case takes
SHADReplacement cylinders supplied with their own keys. SHAD's lock guide shows which top and side cases can share a key and notes that some side cases come with an extra lock for the top case
KappaLock sets through Kappa dealers. Give the dealer the exact case model so the part matches

Matching keys across your luggage

SHAD publishes a lock guide for exactly this. You pick your top case and your side case, and it tells you whether the two can run on one key and which part to order, or whether to use the spare lock that came with the side cases. It also marks certain cases as not compatible with each other, so a mixed set of older and newer SHAD luggage may stay on two keys.

With Givi, the matched multi-case lock sets do the same job: you replace the barrels in each case with a set cut alike. If you want to change a case from one Givi lock style to the other, ask a Givi dealer whether your case accepts it before ordering.

Where a locksmith fits in

The makers' position is about what they will supply, not about what can be done to the lock on your case. A locksmith works on the lock in front of them. In many cases we can make a working key for the lock already on your top case, which keeps your existing barrel and saves waiting on parts. Where the barrel is worn, damaged, or you would rather change it, we fit the replacement set you have bought, or match a multi-case set so everything opens with one key.

The situation that most needs care is a locked case with no key and something you need inside it. Forcing the lid tears the latch or cracks the case. We open it without damage where possible and leave the case usable. Because a top case can come off the bike, we ask for photo ID and the bike's registration or title before opening one or making a key.

Quick questions

Can Givi cut a key from the code on my lock?

Not once all keys are lost. Givi's FAQ says a duplicate is not possible even with the code stamped on the barrel, and that the lock has to be replaced.

Will SHAD send a replacement key?

No. SHAD says it does not copy keys or hold master keys and recommends changing the cylinder, which comes with its own keys.

Can my top case use my motorcycle's ignition key?

SHAD says no for its cases, because the lock codings are completely different. Factory luggage from some motorcycle makers can be matched to the bike key, but that is a different lock design.

I have one Givi key left. What should I do?

Get it copied now. Givi's advice while you still have a key is to buy a blank and have it cut, which is far simpler than replacing the lock later.

Can one key open my top case and both side cases?

Often, yes, within one brand. Givi sells matched multi-case lock sets and SHAD publishes a lock guide showing which of its cases can share a key.

Services that can help

Keep reading

Where we work

Sources

Page last updated .

Call nowText us